Executive Summary Assignment Example | Topics and Well Written Essays - 250 words - 2

Executive Summary - Assignment Example This is because some of the companies opted for hiring many receptionists to handle the high job demands, but they could not manage to professionally assist guests. Organizations should hire our services because we will implement technological approaches in our operations that comprise of surveillance cameras and ipads. The cameras shall help in monitoring the performance and interaction of our staffs with the prospective customers at the work stations. The cameras will also guarantee customer safety and reduce the risk prevalence in the offices. One of the advantages of working with GCS is that it boasts of professional personnel who are competent in their duties. The company also offers other fringe services such as telephone operators, messengers and personal assistance to clients. As a result, it would be essential to hire the services of GCS in order to save time and enable the office workers concentrate on other productive tasks. Although GCS is a new establishment in the regio n, it shall ensure that clients receive professionalized concierge services that save time and

Surviving Infidelity in a Marriage Essay Example | Topics and Well Written Essays - 1000 words

Surviving Infidelity in a Marriage - Essay Example This essay will focus on critical review of two professional journal articles related to child abuse and the way counseling helps them. In the article, â€Å"Rape, statutory rape, and child abuse: legal distinctions and counselor duties† Mitchell and Rogers (2003) tries to find out the responsibility of a counselor in case of rape and child abuse. Child sexual abuse is a common phenomenon which the counselors have to face very often as they deal with school children. Child Sexual Abuse is defined as when the care taker of the child participates in or assists in forceful molestation of the child for gratification of the self. It may be seen if the legal duties are taken into consideration of the counselor there will be a lot of contradictions between the legal duties and between what the counselors ethically thinks is correct. There are a lot of differences existing in the laws regarding child sexual abuse, rape and statutory rape and it becomes difficult for the counselors to understand which cases they should report as cases of child sexual abuse. They get confused. So it is advised that the counselors are w ell aware of the laws of their particular state and should also be aware of the situations when they should report the cases to the adequate authority. It is also advised that when the counselors are confused they should take the advice of the legal authorities regarding their duties. In case the school counselors are confused about the age differences and are not very sure whether to report it as child sexual abuse or rape then they should seek the help of a concerned attorney or the child services department and accordingly should report the case formally. Child sexual abuse and child rape involves a lot of feelings like guilt, shame, depression, anger and insecurity, therefore it is must that the counselors are well equipped to deal with these issues and try to relieve the victims of all these feelings

The Investigation Of Police Corruption

The Investigation Of Police Corruption One cannot separate police corruption from police abuse of force. Whenever an officer uses force, that officer needs to be able to justify the use of force. Law enforcement ethics go far beyond an officer choice to accept a cup of coffee, or a free car wash. The fact remains that whenever an officer lowers the ethical, and morals standards it affects every area of police operations and adversely affects the ability of law enforcement agencies to perform the mission that the community has entrusted them to do. When police misuse their power, and authority it lowers the departments professional competence; and at worse it spreads corruption through the department. Tract: The job of a law enforcement officer can be tough. Law enforcement officer are sometimes plagued with situation that test their ability to enforce the law and maintain order. Law enforcement officers today face a constant battle to establish and maintain higher ethical standards for police personnel. This mission becomes tougher each day when one considers the importance of fighting terrorism, drugs, human trafficking, and many other major issues. In the last few years, ethical issues in law enforcement have been affected by three critical factors-the growing level of temptation stemming from the illicit drug trade, the challenges posed by decentralization, and the potentially compromising nature of the police organizational culture. These factors make managing for ethics today far more different and demanding than it was in the past. How can law enforcement fight the war on crime and maintain personal liberties? One can examine the social stigmas and stereotypes that either further or reduce police corruption to help develop a better understanding of police corruption. Finally what is the solution to effectively control police corruption, enforce proper ethics, and ensure law and order? Terrorism is a new issue for law enforcement personnel today. Terrorism has had a great impact on the police mission here in the United States. Experts now are debating the proper way to address terrorism in America without creating ethical dilemmas. Can federal law enforcement hold all suspected terrorist within the United States in jail until they are cleared? Not legally. Would it be ethically okay to arrested terrorist, and allow them to be tried within the United States without legal counsel? No. Can the federal Government issue wire tapes on citizens phones without creditable evidence. No. What is the correct way to handle the issues on terrorism? The Police Executive Research Forum has outlined key ways to handle the war on terrorism. First, in order to prevent terrorist acts on U.S. soil the public must understand that Federal Law enforcement cannot do it alone. State, and Local law enforcement along with the general public must work together to gather intelligence on suspect ed terrorist. Local Law enforcement can use the community policing method to establish citizen engagement, partnership, trust, information sharing, and collaborative problem solving. With a relationship developed with the community, police can better identify potential suspects, and become proactive in the war on terrorism. Law enforcement can ethically address the war on terrorism. The problem is that social stigmas can play a key role in either furthering police corruption or reducing it. Social stigmas impact the way police perform because police sometimes use social stigmas to be proactive rather than being reactive to crime. For example, an officer may approach a young man walking around a suburban community with his hat turned to one side, and his pants below his knees. The office may see the social stigma of a thug, someone who is considered to be up to no good. When police use social stigmas in this way, the community will view it as good police work. However the use of social stigmas can also bring on police corruption. Some officer may violate human rights, with racial profiling, or just mistreating someone because of their outer characteristic. For example, whenever an officer sees someone with big rims and loud music he assumes they sell drugs. So the officer pulls the young man over and treats him like he is a criminal. First the officer ask for identification, then removes the young man from the car and performs an illegal search of the car and finds drugs . Now the officer will be forced to falsify reports, which is a form of police corruption. Social stigmas are no better than stereotypes; one person may fit the stereotype or social stigma, but one should never conclude that a stereotype or social stigma applies to everyone. When officer begin to apply a social stigma to everyone, they can easily fall into police corruption. With that being said, citizens should not apply social stigmas to all police officer. One can conclude that some police officers are involved in police corruption but not all. The ethical issues seen in police corruption can also be seen in police abuse of force. One cannot separate police corruption from police abuse of force. Whenever an officer uses force, that officer needs to be able to justify the use of force. Law enforcement ethics go far beyond an officer choice to accept a cup of coffee, or a free car wash. The fact remains that whenever an officer lowers the ethical, and morals standards it affects every area of police operations and adversely affects the ability of law enforcement agencies to perform the mission that the community has entrusted them to do. When police misuse their power, and authority it lowers the departments professional competence; and at worse it spreads corruption through the department. Although only a few officers may be involved in an act or corruption or abuse of force; the community will perceive all members of that department as incompetent, corrupt, or brutal. It is important to know that a few incidents of corrupt or brutal police behavior can overshadow or even negate years of efficient and honest po lice service, and cause long-term damage to an agencys reputation. Illegal and unethical acts by police officers, create community increased antagonism toward what appears to be an unappreciative or even hostile public, less citizen cooperation, more friction in police-citizen interactions, more invitations to corruption, and more confrontations that may lead to the use of excessive force. It is a classic vicious cycle, with worsening community relations, an increase in hostility between police and citizenry, and a concomitant growth of public contempt for the police all generating a downward spiral that far too often ends in tragedy. Many ethical factors that are behind police corruption can be found in police abuse of powers, and excessive force. Police corruption is sometimes motivated by an officers desires for money, respect, and power. Likewise, the use of excessive force can be used to ensure and officer receives money, maintains power, and respect from the community. Many officers who are involved in corrupt activities will often use force to maintain and protect their corrupt activities from reaching the public or media. In addition to that, officers who are under a lot of stress can fall into corruption, and are more likely to use excessive force. When police use excessive force, or fall into police corruptions it only hinders the overall mission or law enforcement. The only way to prevent corruption and police abuse is to train officer in ethical standards to strengthen the foundation of police ethics. To strengthen ethical standards officers need to be trained in the correct ways to change moral standards of contemporary society. The world today has lowered the moral and ethical standards of citizens, and police alike. The lack of moral standards, has allowed the community, and law enforcement to take justice in their own hands. Secondly, police need to know and respect the organizational expectations of the police. Society has certain perceptions, images, and expectations of the police. Some of the expectations that the community have of police may not be accurate or realistic. Misinformed or conflicting perceptions of the proper role of the police and conflicting expectations about what is or should be expected from the police often contribute to an environment of confusing built on mixed or even conflicting goals and objectives. As a result , the working environment of police, their morals, and their susceptibility to corruption and brutality are closely watched by the public and the media. With this in mind, police can better handle situation that propose ethical dilemmas. For example, officer now know that the community expects police to be corrupt, and to abuse their powers, so if a officer does the complete opposite, he or she can help raise the standard, and avoid some of those ethical factors that are behind police corruption, and police abuse of powers, and excessive force . Formal training programs can help to ensure that officers understand their departments code of ethics and related expectations Elevate the importance of ethics throughout an agency Underscore top managements support, and Provide specific assistance in areas directly related to ethical behavior (e.g., stress management, use of force, violence reduction, and behavioral science classes). Although more study is need- ed in this area, some empirical evidence supports the contention that formal ethics training fosters improved ethical behavior. One recent study found that officers specifically trained in anger management had fewer incidents of excessive force in making arrests. A distinct but related topic is whether higher education promotes ethical behavior. Clearly, advanced formal education enhances the maturity and professionalism of police officers. The question is whether those positive attributes spill over into the ethical arena.Some research suggests a positive relationship. Adva nced formal education appears to reinforce previously established ethical values in individuals. At the organizational level, one study identified a commitment to learning as one of the three most prominent characteristics common to highly ethical organizations. In conclusion, police corruption anywhere, hurts police everywhere. Police are held to a higher standard by the citizens, and the media. Police officers need to be aware of the social stigmas working against them. Law enforcement Officer need to be trained, and educated on how to hand ethical situation. If the law enforcement community seeks to change the image of police in American they must first become aware the ethical problems and avoid them. Secondly, Police with the help of education one maybe able to avoid the use of excessive force, and corruption. Lastly, law enforcement must correct, their attitude toward those who may fit a certain social stigma. Resource Page

Defining the Neurobiology of Insanity :: Biology Essays Research Papers

Defining the Neurobiology of Insanity: Law, Science, and the I-function Reconciled During the last week or so of class, after a semester of being teased with glimpses of, allusions to, and deferred explanations for the I-function, we at last came face to face with this previously elusive property of the nervous system which allows us to experience experience. The detour was necessary, for it corrected the general misconception that something like an I-function encompasses everything that makes one an individual and defines one's unique personality; it demonstrated the true importance of "the rest" of the nervous system. Indeed, we were shown how the I-function is, in some ways, superfluous, in that it is not necessary for survival. Not to downplay it, however, the I-function is key to understanding what makes us (human beings) what we are, to distinguishing our experience of the world from that of other species. It allows us to conceive of ourselves (our selves) as objects and to perform such behaviors as planning, dreaming, in short, imagining ourselves in situati ons other than the one in which we 'really' are. The last few classes were dedicated to addressing issues which still troubled the majority of the class, such as choice and the supernatural; I, however, found my self wondering about another issue, which no one had yet brought up: insanity. What does it mean to insane? What are the (if any) criteria which determine whether or not a person is sane? Are they reflected in said individual's neurobiological make-up? And finally, how does insanity relate to the I-function? As it turns out, research related to these issues is fairly recent, but increasing rapidly, thanks to technological advances and important contributions from several fields in the neurosciences. My goal here is to report on the answers I was able to find to my questions, as well as to ponder the questions raised by these and foreseeable answers. As might be expected, the term "insanity" has no neurobiological definition and, as a concept in everyday language, is extremely broad and vaguely defined. Not surprisingly, therefore, it is a concept which is neither used nor useful to professionals in the neurosciences, who regard so-called "insane" behaviors as the results of abnormalities or changes within the brain: "...a rough medical translation would be 'psychosis-that is, the more severe kinds of mental illness, involving hallucinations or delusions," (1). In searching for a working criteria of insanity, the closest I came to a formal definition was the criteria used in law to determine whether or not a defendant could be absolved of responsibility for his or her crime. Defining the Neurobiology of Insanity :: Biology Essays Research Papers Defining the Neurobiology of Insanity: Law, Science, and the I-function Reconciled During the last week or so of class, after a semester of being teased with glimpses of, allusions to, and deferred explanations for the I-function, we at last came face to face with this previously elusive property of the nervous system which allows us to experience experience. The detour was necessary, for it corrected the general misconception that something like an I-function encompasses everything that makes one an individual and defines one's unique personality; it demonstrated the true importance of "the rest" of the nervous system. Indeed, we were shown how the I-function is, in some ways, superfluous, in that it is not necessary for survival. Not to downplay it, however, the I-function is key to understanding what makes us (human beings) what we are, to distinguishing our experience of the world from that of other species. It allows us to conceive of ourselves (our selves) as objects and to perform such behaviors as planning, dreaming, in short, imagining ourselves in situati ons other than the one in which we 'really' are. The last few classes were dedicated to addressing issues which still troubled the majority of the class, such as choice and the supernatural; I, however, found my self wondering about another issue, which no one had yet brought up: insanity. What does it mean to insane? What are the (if any) criteria which determine whether or not a person is sane? Are they reflected in said individual's neurobiological make-up? And finally, how does insanity relate to the I-function? As it turns out, research related to these issues is fairly recent, but increasing rapidly, thanks to technological advances and important contributions from several fields in the neurosciences. My goal here is to report on the answers I was able to find to my questions, as well as to ponder the questions raised by these and foreseeable answers. As might be expected, the term "insanity" has no neurobiological definition and, as a concept in everyday language, is extremely broad and vaguely defined. Not surprisingly, therefore, it is a concept which is neither used nor useful to professionals in the neurosciences, who regard so-called "insane" behaviors as the results of abnormalities or changes within the brain: "...a rough medical translation would be 'psychosis-that is, the more severe kinds of mental illness, involving hallucinations or delusions," (1). In searching for a working criteria of insanity, the closest I came to a formal definition was the criteria used in law to determine whether or not a defendant could be absolved of responsibility for his or her crime.

Chapter 12 QFR Fundamental of Management Essay

1. Describe the difference between communication and effective communication. How can a sender verify that a communication was effective? How can a receiver verify that a communication was effective? Communication is the process of transmitting information from one person to another. Effective communication is the process of sending a message in such a way that the message received is a close meaning as possible to the message intended. To encode and transmitted through appropriate channel. After messages are received it is decoded back into a form that is meaningful for the receiver. 2. What are the similarities and differences of oral and written communication? What kinds of situations call for the use of oral methods? What situations call for written communication? Oral communication is face to face conversation group discussions, telephone calls, and other circumstances in which the spoken word is used to transmit meaning. Written communication is memos, letters, reports, notes and other circumstances in which the written word is used to transmit meaning. Oral communication or email may be preferred when a message is personal, nonroutine, and brief. Written is best used when it is impersonal, routine and longer. 5. Describe the individual and organizational barriers to effective communication. For each barrier, describe one action that a manager could take to reduce the problems caused by that barrier. Individual barriers are conflicting or inconsistent signals, credibility about the subject, reluctance to communicate, poor listening skills, and predispositions about the subjects. Organization barriers are semantics, status or power differences, different perceptions, and noise, overload and language differences. Overcoming individual skills are develop good listening, encourage two way communication, be aware of language and meaning, maintain credibility, be sensitive to receiver’s and sender’s perspective. Chapter 13 QFR 2. What are the stages of group development? Do all teams develop through all the stages discussed in this chapter? Why or why not? How might the management of a mature team differ from the management of teams that are not yet mature? The stages of group development are (1) forming—bringing members together and getting them acquainted; (2) storming—developing group  identity, structure and leadership, often through conflicts; (3) norming—accepting and codifying role structures and behavioral norms; and (4) performing—moving beyond group formation to begin accomplishing the group’s purpose. Groups typically move through all the stages in the order given, and groups that try to â€Å"short cut† the group development process will often have unresolved issues that will persistently re-surface. The management of mature teams can focus more on performance than on effective development, which means a focus on tasks, rather than on relationships, structures, and culture. For example, while members of a developing group may want or need to spend time getting to know their fellow members through â€Å"ice-breaker† activities, members of mature groups may resent being forced to spend time on such activities. 4. Identify two examples of informal leaders. Can a person be a formal and an informal leader at the same time? Examples of informal leaders might include such persons as the most experienced secretary in a work group, an intelligent and articulate student who serves as a spokesperson for the class, or a neighbor who organizes social events. Formal leadership is conferred by one’s position within the organization while informal leadership is granted to individuals who are admired and respected by others. Clearly then, one person can be both a formal and an informal leader. An example would be a tenured professor who has a formal leadership role in his or her department or college and who is admired and respected by students and colleagues, serving as an informal role model.

1984 and Metropolis Essay Essay

The quote â€Å"The object of power is power† is heavily supported by George Orwell’s 1949 novel ‘1984’ and Fritz Lang’s 1927 film ‘Metropolis’ through their intertextual connections and shared perspectives. Both texts were composed around the context of pre and post World War 2 which is clearly evident through their settings, characterisation, themes and ideas. Through Orwell’s and Fritz’s use of dystopic societies, empowerment of women and detrimental dictatorship rule it is blatant that George Orwell’s quote â€Å"The object of power is power† is quite strongly supported by the intertextual connections and shared perspectives of Orwell’s ‘1984’ and Lang’s ‘Metropolis’. Through the use of Orwell’s and Lang’s intertextual connections of political reform and shared perspectives of dystopic societies it becomes apparent that the quote â€Å"The object of power is power† is strongly supported throughout the two texts. The meaning of this quote is also made abundantly clear within the texts as the dictatorship rulers within both texts acquire power simply to have power and authority, instead of for the good of the people. This features predominantly in both texts through their shared perspectives on dystopic settings made apparent by their use of symbolism. In Orwell’s ‘1984’ only 2% of the populace resides in the ‘Inner Party’ whilst the other 98% is suppressed within the lower classes in either the ‘Outer Party’ or the ‘Proles’. This totalitarian, power based society is made dystopic by the overwhelming power and control exhibited by the tyrant dictator ‘Big Brotherâ €™. This is emphasised through Orwell’s use of symbolism in O’Brien’s words as he says â€Å"If you want a picture of the future, imagine a boot stamping on a human face – for ever.† (pg 307) The symbolism between the boot and big brother, and the human face and society emphasises the suppressive nature of this totalitarianism rule, casting the society into dystopia. This also forms a contextual connection to Nazi Germany’s strive for a totalitarianism society. This same idea of a dystopic society is epitomised within Lang’s film, ‘Metropolis’ through the suppression of the working class in ‘the depths’ by the powerful master, Joh Frederson. The working class in this film are forced to endure agonising labour in extremely dangerous environments whilst the upper class, the ‘sons’ are free to live at their will. The dystopic setting of the ‘depths’ becomes evident  through Lang’s use of symbolism when the dictator’s son, Freder, journeys to the depths and starts to see the workers being eaten up by the machines in the scene ‘Slaves of the Means of Production† (14.58-17.52). This symbolises the dystopic society in which workers do not have the right to be safe. This idea forms a contextual connection to the 1920’s Weimar Republic where there were two distinct classes, the conservative elite, who were free to live at their will, and the workers who were forced to endure labour with no guarantee for safety. Through the contextual connections of political reform and the shared perspectives of dystopian societies the quote â€Å"the object of power is power† is strongly supported by George Orwell’s ‘1984’ and Fritz Lang’s ‘Metropolis’. Similarly, the quote â€Å"the object of power is power† is also supported by Orwell’s and Lang’s shared perspectives of the rebelling of women and the intertextual connections of the empowerment of women during the times these texts were created. This is made evident through the use of juxtaposition throughout the two texts. In Orwell’s ‘1984’ the dystopic totalitarianism society is suppressed into worshipping Big Brother and dares not to step away from the control of the organisation. The female protagonist in the novel, Julia, however is not as suppressed as she leads the organisation into thinking and begins to rebel against them. This is seen within dialogue between her and Winston when she says â€Å"I’m corrupt to the bone.† This juxtaposition between her and the suppressed masses outlines her rebellion against the tyrant power of the organisation. This links in with the contextual connection to the empowerment of women during the post World War 2 period as a result of women refusing to give up the power they had acquired during the war. Correspondently, Lang also uses this shared perspective of the rebelling of women in his film, depicted through the character of Maria. Maria is displayed as neither a citizen of Metropolis nor a worker in the depths but as a source of optimism and rebellion for the suppressed workers of the depths. Lang uses lighting to juxtapose her from the workers in the depths, illuminating her whilst keeping them in shadowed tones. This juxtaposition emphasises the rebellious mentality of Maria against the dictator of metropolis, Joh Frederson. Even though Maria’s rebellious nature is far more peaceful than Julia’s, she still epitomises  the contextual connections of the empowerment of women as a result of refusing to give up the power they had acquired during World War 1. Through Orwell’s and Lang’s use of juxtaposition, it is evident that the shared perspectives of the rebelling of women and the intertextual connections of the empowerment of women as a result of refusing to give up the power they had acquired during the World Wars, strongly supports the quote â€Å"the object of power is power†. Equivalently, through the use of Orwell’s juxtaposition and Lang’s symbolism, the shared perspectives of the detrimental impact of dictatorship rule and the contextual connections of political reform are shown to strongly support the quote â€Å"the object of power is power†. In Orwell’s ‘1984’ the dictatorship rule of Big Brother in the totalitarianism society is shown to brainwash the populace, making them believe whatever the organisation wishes them to and bending them at their will. This is most prominent in Big Brothers slogan â€Å"WAR IS PEACE. FREEDOM IS SLAVERY. IGNORANCE IS KNOWLEDGE.† This quote is seen multiple times throughout the novel and signifies the total power and control the organisation has among the people, forcing them to believe the illogical and thus taking away their humanity. Through this we can see both Orwell’s shared perspective on the detrimental impact of dictatorship rule and the intertextual connection to political reform as he makes a statement against the dictatorship of Nazi Germany during World War 2. Comparably, Lang also shows his shared perspective on the detrimental impact of dictatorship, however he has done so by the use of symbolism. Lang has showed how the total power of dictatorship can be detrimental to humanity by the way in which the workers move in the depths. He shows them to have rigid, machine like movements symbolising their loss of their humanity to the powerful dictatorship rule. This is seen in the scene â€Å"Slaves of the Means of Production† (14.58-17.52). This also links in with the intertextual connections of political reform as it shows Lang’s approval for the government of the time, ‘the Weimar Republic’ and his disapproval of the old dictator monarchy of the Kaiser. Through Orwell’s use of juxtaposition and Lang’s symbolism, it is evident that the shared perspectives of the detrimental impact of dictatorship and the contextual connections of political reform strongly support the quote â€Å"the object of  power is power†. The quote, â€Å"the object of power is power† is strongly supported by the shared perspectives and intertextual connections of George Orwell’s novel, ‘1984’ and Fritz Lang’s film, ‘Metropolis’. Through the use of techniques such as symbolism and juxtaposition the two texts incorporate shared perspectives of dystopic societies, the rebelling of women and the detrimental impact of dictatorship rule as well as intertextual connections of political reform and the empowerment of women. Through these shared perspectives and intertextual connects it is evident that George Orwell’s quote, â€Å"the object of power is power† is strongly supported in both George Orwell’s 1949 novel, ‘1984’ and Fritz Lang’s 1927 film, ‘Metropolis’.

Japanese Translation - Translating from Japanese

Japanese Translation - Translating from Japanese Choosing the right words for a translation can be difficult. Some sentences are translated literally, word by word. However, most sentences can be translated in many different ways. Since Japanese verbs have a formal and informal form and there is also male and female speech, the same sentence can sound quite different depending on how it is translated. Therefore it is important to know the context when translating. Being able to translate can be fun and rewarding when learning a language. After you learn the basics of Japanese, I recommend you to try to translate a sentence yourself first before asking for help. The more you practice, the better you get. Dictionaries You might want have a good English-Japanese/Japanese-English dictionary. Electric dictionaries and online dictionaries are also widely available nowadays. Although standard dictionaries can’t compete for content with an online dictionary, I still like to look up words the old fashion way. Learning about Particles You also need to have a little knowledge about particles. They are an important part of Japanese sentences. Sentence-ending particles are often used to distinguish male and female speech as well. Online Translations Online translation services like Google Translate and Bing Translator are not always reliable, but you can get rough idea of the meaning in a pinch. Translation Services If your translation is something bigger or beyond your knowledge, you could seek professional help form a translation service.

Free Essays on Battle at Bunker Hill

IV. Battle of Boston A. On June 17, 1775 two battles occurred. One battle on Bunker Hill, the other at Breed Hill. The two battles resulted in a combined 1,054 British Deaths, and fewer than 450 colonist deaths. On June 17, 1775 the Battle of Bunker Hill took place. It is one of the most important colonial victories in the U.S. War for Independence. Fought during the Siege of Boston, it lent considerable encouragement to the revolutionary cause. This battle made both sides realize that this was not going to be a matter decided on by one quick and decisive battle. The battle of Bunker Hill was not just an event that happened overnight. The battle was the result of struggle and hostility between Great Britain and the colonies for many years. Many of the oppressive feelings came as a result of British laws and restrictions placed on them. It would not be true to say that the battle was the beginning of the fight for independence. It is necessary to see that this was not a rash decision that occurred because of one dispute, but rather the seeds sown to precipitate this battle were planted a long time ago and had just burst forth. Perhaps two of the most notable injustices, as perceived by the colonists, were the Stamp Act and the Intolerable Acts. The Stamp Act was passed by the British Parliament to raise money for repaying its war debt from the French and Indian War. The Act levied a tax on printed matter of all kinds including newspapers, advertisements, playing cards, and legal documents. The British government was expecting protest as result of the tax but the level of outcry they received. The colonists were so angry because they had no voice in Parliament which passed the law, thus came the famous cry, "No taxation without representation!" The colonists would protest these laws with the Boston Tea Party. The British responded to this open act of rebellion by imposing the Intolerable Acts, four laws designed to pu... Free Essays on Battle at Bunker Hill Free Essays on Battle at Bunker Hill IV. Battle of Boston A. On June 17, 1775 two battles occurred. One battle on Bunker Hill, the other at Breed Hill. The two battles resulted in a combined 1,054 British Deaths, and fewer than 450 colonist deaths. On June 17, 1775 the Battle of Bunker Hill took place. It is one of the most important colonial victories in the U.S. War for Independence. Fought during the Siege of Boston, it lent considerable encouragement to the revolutionary cause. This battle made both sides realize that this was not going to be a matter decided on by one quick and decisive battle. The battle of Bunker Hill was not just an event that happened overnight. The battle was the result of struggle and hostility between Great Britain and the colonies for many years. Many of the oppressive feelings came as a result of British laws and restrictions placed on them. It would not be true to say that the battle was the beginning of the fight for independence. It is necessary to see that this was not a rash decision that occurred because of one dispute, but rather the seeds sown to precipitate this battle were planted a long time ago and had just burst forth. Perhaps two of the most notable injustices, as perceived by the colonists, were the Stamp Act and the Intolerable Acts. The Stamp Act was passed by the British Parliament to raise money for repaying its war debt from the French and Indian War. The Act levied a tax on printed matter of all kinds including newspapers, advertisements, playing cards, and legal documents. The British government was expecting protest as result of the tax but the level of outcry they received. The colonists were so angry because they had no voice in Parliament which passed the law, thus came the famous cry, "No taxation without representation!" The colonists would protest these laws with the Boston Tea Party. The British responded to this open act of rebellion by imposing the Intolerable Acts, four laws designed to pu...

How Are the Experts Using LinkedIn - Guest Post by Helen Denney-Stone

How Are the Experts Using LinkedIn - Guest Post by Helen Denney-Stone I was honored to discover an article on LinkedIn Publisher that gave me extensive mention and props for my presentation at the LinkedIn Success Summit. I requested that the author, Helen Denney, allow me to publish a revised version of the article on my blog, and she graciously agreed! Enjoy the updated article below! ⊕⊕⊕⊕⊕ When Liam Austin chose the speakers for his LinkedIn Success Summit, he invited Brenda Bernstein and 34 other top speakers to share their winning strategies and tips on how to use the LinkedIn platform. Together, these invited experts condensed decades of experience and success into a wealth of video sessions. If you haven’t yet been able to generate a positive Return on Investment (ROI) using the LinkedIn platform, you most definitely will after hearing these stories and strategies. The following are my takeaways from 3 of the experts, all who have one major thread in common: they are all women experts on LinkedIn! They give advice on how to stand out on LinkedIn, and even how to build a basic LinkedIn profile, in case you’re just starting out! Brenda Bernstein #1 Amazon best-selling author of How to Write a Killer LinkedIn Profile. Brenda is a highly qualified and award winning writer. Founder of the Essay Expert, LinkedIn expert and Speaker. Brenda believes that you can profit from your personality when writing your LinkedIn profile. The key points below are her strategies on how to do this in an authentic and memorable way. Don’t be afraid to share your values, vision, beliefs and personality prominently in your profile. Do this effectively and you will stand out from your competitors. Get a branded head shot that has some oomph! Try choosing 3 words that describe your personality, and share them with your photographer. Then choose your head shot based on which one best captures those 3 words. Don’t lose sight of keywords as you share your personality! Prioritize keywords in your headline if you want to be found in searches. Write your Summary to show your personality and the personality of your business. Figure out what makes you and/or your business stand out- and if you want to be personable, write in the 1st person (I/me).Brenda suggests that to get material for your LinkedIn Profile, you can write down 3 peak moments in your life/business. Next pull out any common threads. You will learn a lot about what you have to offer and what makes you tick. You can also ask people you know what they see as your strengths. Write down what they say and weave it into your profile. If they like it then others probably will too! Finally, determine what you want people to take away from reading your profile. What action do you want them to take next? Read your profile Summary now that you’ve included more of yourself in it. If you were a member of your target audience, would you take the action you want your readers to take? Publish on LinkedIn and show your personality and credibility in your articles. Make sure to respond when people comment on your posts. Be active in LinkedIn Groups and don’t be afraid to show your humour, intelligence and personality. When someone sends you a friend invitation, respond and give them something free first- something you feel will be of value to them. Brendas Quotes: â€Å"Almost no one likes writing about themselves. But almost everyone likes seeing themselves expressed authentically on paper.† â€Å"Top mistake on LinkedIn: Thinking all you need is a KILLER LinkedIn profile.† ⊕⊕⊕⊕⊕ Donna Serdula Donna, the Founder of Vision Board Media, is a LinkedIn Profile Optimisation Expert speaker and author. Donna explained your profile is NOT your resume. Your resume is your professional past; it is what you have already done. Your LinkedIn profile is your online reputation- who you are and why connections should pay attention to you. It is your digital representation of your future. Make your profile compelling, exciting and authentic. It is, after all, people’s first impression of you. It should make people want to know more. Donna’s 3 Keys to Maximising your LinkedIn Profile: Before you start on your profile, answer this question: What is the goal of my LinkedIn profile? Only after you know your goal can you can write strategically, keeping that goal in the forefront of your mind. Always talk about what your target audience wants to hear. Speak to them directly, as if they are across the table from you! Headline Think what people would be typing into the search bar on LinkedIn to find you. Optimise your profile for these keywords so you show up in search results. How can you stand out when someone is scrolling through the search results? The first part they will see is your name, your profile picture, and your headline (which by default is your current job title and your company). So make sure your profile image is professionally done, and that your headline is optimised with keywords, is compelling and showcases a benefit statement. Summary Your Summary, which is 2000 characters maximum, should demonstrate who you are, that you understand your readers’ problems, and that you can help them.Your summary should be in 1st person narrative and written conversationally. Highlight some successes, demonstrating how you can help your audience.Be succinct and answer what your customers/clients want to know. If possible, include a link and offer for them to take the next step. Include a clear call to action at the end, as well as your phone number and email so people can contact you easily. Keywords Research your keywords. Then make sure that these keywords are in your heading, summary, experiences and interests. Place the keywords anywhere that is reasonable. Your profile must read naturally and authentically. Never, never stuff your profile with keywords; but take the time to place them everywhere that is plausible. Donna’s Quotes: â€Å"Recognize your target audience and don’t say what you want to say, rather think what your target audience wants to hear.† â€Å"Step back, think about your goal, think about your audience.† ⊕⊕⊕⊕⊕ Karen Yankovich Founder of Linked Up Success, Karen is a LinkedIn expert and speaker. When someone puts your name in a Google search and sees your LinkedIn profile right at the top, this is statistically what they will look at first. This is a brilliant opportunity through your profile to instantly communicate who you are, your personal brand. Use your profile to get them to feel comfortable doing business with you. Karen shares her 5 tips that you need to pay attention to when completing your profile. Be certain to complete these 5 areas and use them effectively. Headline Your headline should be strong and customer/client centric. In other words, just stating that you are CEO is not enough! Your headline is searchable by Google and shows up prominently in Google Search. Be bold, own what you do, and be confident when painting that picture for others to see! Summary Firstly, actually fill this out! Break your summary into easily consumable sections with bullet points. Write it in the 1st person, use all 2000 characters you are allowed, and include keywords. Experience This section builds on who you are and what you have accomplished to be where you are today. Think about all your past experience, not just your previous jobs. Position yourself as influential and the expert you are. Call to Action Remember to put in a call to action not in a salesy way, but something like, â€Å"Reach out if you want a complimentary training†; â€Å"Listen to my podcast†; or â€Å"Download my free report† Make your profile stand out by taking advantage of all the ways LinkedIn provides to customize your profile. Boost your business with 3 further strategies from Karen: Build up your recommendation and be active; actually ask for recommendations. Show up! Be active in groups, post regularly, share, and comment on influencers. Sort your connections by recency, then send a personal note to the most recent. When they respond, take the opportunity to offer help. Karen’s Quotes: â€Å"Start with a strong personal brand to grow your business on LinkedIn.† â€Å"#1 Mistake on LinkedIn: Don’t be pushy, be mindful.† ⊕⊕⊕⊕⊕ Did you pick up the major common thread? It’s your profile! Your LinkedIn Profile is like a 5-minute fast dating session where you get to say who you are, what you do and how you can help. It is your audience’s first impression- make it great, make it authentic, and make it you! The LinkedIn Success Summit was full of many wonderful interviews and the above is a summary of just 3 of the 35 presenters. You’ll find even more great tips by clicking here. Would you like to read more from Helen about LinkedIn experts and influencers (and save yourself the time of listening to all the presentations at the Summit)? Then please click here to read Part 1 of Helen’s Summit Summaries! Helen Denney-Stone is CEO and co-founder of Nudge Marketing, a firm that provides affordable, results-based marketing training for small businesses. She is a published author and artist and loves all things, mindful and marketing†¦ oh! and high heels, boxer dogs and the smell of freshly cut grass. Read the original version of this article here.

GLOBALIZATION POVERTY AND INEQUALITY Essay Example | Topics and Well Written Essays - 9000 words

GLOBALIZATION POVERTY AND INEQUALITY - Essay Example It makes us wonder whether in this context, globalisation is actually beneficial as the neoliberals claim. In fact, time has come to search for other viable alternatives, or if necessary, to modify globalisation in such a manner that it really helps to serve the poor and needy, and helps to remove all boundaries of inequality. Executive Summary: A close look at the arguments presented by the neoliberal theorists will show us that in the past two decades there has been a marked decrease in the income inequality index factor and also a downward growth rate of the poverty factor, a great deviation from the picture that we have seen for a century and a half. Neoliberal arguments further explain that this improved picture is arising mainly from the globalization factor that is bringing about a fusion of economies throughout the world breaking all national borders and boundaries. A look at the economic conditions of the third world countries reveal that, nearly all of the South East Asian countries, especially China and India, have progressed rapidly with a fall in poverty rates. However the central and eastern European countries, comprising many of the former members of the Soviet Union republic, and the countries of the sub-Saharan belt have regressed and shown increased poverty levels. The Latin American cou ntries are stagnant as far as their poverty graph is concerned; however the neoliberal argument says that globalization is here to stay, since after the break down of Bretton Woods, it has been generally concluded that it is more beneficial to have an converging system, instead of opting for interests that conflict and create barriers. This paper will explore and will take an in-depth look at the arguments put forward by the neoliberal theories, and will analyze the empirical basis for their arguments. â€Å"Globalization

All the Presidents Men Movie Review Example | Topics and Well Written Essays - 1000 words

All the Presidents Men - Movie Review Example Just as the blockbuster about the shark succeeded precisely because it jettisoned all but the spine of the story on which it was based, so does this real-life suspense thriller benefit from narrowing its focus. The two reasons that the film stops at the midway point of the book are that time constraints simply would not have allowed the entire book to be filmed and, more importantly, because although the film is directed in the style of a mystery, the ending is already known by most filmgoers. As a result, most of the bulk of the second half of the book which details the downfall of the President's men would be viewed as little more than an anticlimax if put on film. The filmmakers made the brilliant decision to not only end their story before it devolved into a numbing lesson on what at the time was very recent history, but they also chose to end the film on a downbeat note for the reporters. The central setting of the story is the offices of the Washington Post; there are only brief and cursory visits to the home life of these reporters. That is essential toward showing that the story is bigger than they are. Even though they grow throughout the film in stature, they are constantly dwarfed by their surroundings, from the huge set of the Post offices to the monuments and landmarks in Washington. This effect of showing that these two really were very little men attempting to break through the walls of a massive system against which few would have thought they could win is most effectively portrayed in the memorable shot in the Library of Congress. The scene begins at the level of the characters as they begin flipping through book borrowing cards. The camera then slowly ascends upward and the two reporters almost get lost as they become as small as ants in the massive maze of corridors and tables of the Library of Congress as seen from its ceiling. The shot is a metaphor f or the process of both investigative journalism in general, and the investigation the most powerful man in the country in particular. Equally effective is the style of editing that contributes to an overpowering sense of isolation from power. The very idea of contemporary editing effects with shots lasting only a few seconds would be counterproductive. The film is primarily a collection of long shots and extended scenes of dialogue punctuated by appropriate moments of silence. What this method accomplishes is creating a sense of dread and fear. Paranoia runs throughout the film, especially in the scenes involving Deep Throat. Deep Throat in the book was, as he had to be, merely a cipher; he had no real personality, existing more as a talking head. Hal Holbrook infuses the character of Deep Throat with a snide and even derisive quality that pumps electricity and humanity into scenes that ran the risk of falling flat. Since Deep Throat's real identity was a mystery when the film was made, the character could have suffered by being characterized too generically. Paradoxically, Deep Throat comes off as one of the mos t human of all the characters and this is partly due to the shadowy atmosphere in which he is filmed. Even a scene as simple at the reporters pulling out a parking lot on the roof and disappearing into the vast expanse of Washington, DC is imbued with hidden horrors. All the President's Men does not just stand as one of the

Business Memo on AVON Essay Example | Topics and Well Written Essays - 750 words

Business Memo on AVON - Essay Example More and more women aspired to be more than just homemakers and part time sales women and more importantly fewer women purchased products door to door. New innovative ways of selling such products are being adopted by its competitors like specialty retail chains. Selling through internet was taking off in a big way. There were no doubt many other reasons also contributed for this; product positioning and price (Avon’s products had little appeal with teens and many lower-income women found Avon’s products too expensive), poor brand image (not glamorous), inadequate research and lack of new products, but these as has been seen could be quickly addressed with appropriate results. While suggesting solutions to problems, it is being taken without questioning for the time being that the company does not want to change its core value of reaching customers predominantly through its direct representatives. Avon is the world’s largest direct seller of beauty products (Miller and associates, 107). Whether the company is deriving competitive edge through this strategy is not verifiable because of lack of data. Assuming it does, the solution to the problem will have to address the issue of how to better equip its sales representatives to deliver better. The solution in brief would see the entire marketing model is reengineered to see that the selling agents add substantial value as channel partners to the company, as well as create scope for themselves to earn much more and find self-fulfillment in their association with Avon. Such an exercise should also make it possible for the company to become flexible in deciding its channels of marketing. Players in the CFT industry operate in an oligopolistic market (Oligopoly watch 19 March 2006). No company derives advantage from one sole unique competitive advantage. They follow several strategies

Business Law exam 2 Essay Example | Topics and Well Written Essays - 750 words

Business Law exam 2 - Essay Example This indicates that the female employee was not being pressurized through organizational apparatus to socialize with the male employee. There is some indication to the creation of a hostile environment by the female employee herself by socializing with a male employee in this fashion. The female employee’s adverse reaction to the male employee’s advances changed the situation altogether. She was denied fair compensation and pay raise for her work. There is little explanation for the sudden fall in her quality of work from the company’s end making coercion through official apparatus a strong possibility. The lack of response from the human resources department especially its lack of providing a sexual harassment mechanism to deal with the situation is also clear. This also serves to indicate that employer and his other agents were fully aware and complacent over the situation. The female employee had to seek psychiatric assistance in order to resolve her issues, w hich in turn indicate grievous damage to herself. Such conduct had both a â€Å"deleterious† as well as â€Å"severe and pervasive† effect on the female employee without doubt. Furthermore, the harassment occurred during employment which makes the employer vicariously liable. The move by the male employee to settle down the situation by offering greater rewards also casts doubt on the male employee’s motives. Given the circumstances of the case, it is clear that sexual harassment laws apply to the case. The employer’s attitude of ignoring complaints made by the female employee means that the tort of Constructive Damage has been set in motion. On another note, it is clear that although sexual undertones and overtones may have existed in the organization but these were latent only. In this fashion, such sexual tones cannot be considered as hostile environment. Furthermore, the female employee’s outstanding performance in the first six

Why does it matter what shape a molecule has Essay

Why does it matter what shape a molecule has - Essay Example These are the contexts in which the manner in which materials behave are described, whether they are simple gases, or complex biological structures. The bonds between atoms have distinct lengths, energy and direction which distinguish the atomic structure of materials. The shape of a molecule is formed by the spatial relationships of chemically bonded atoms, and this feature contributes significantly to understanding how molecules react with each other. Ionic bonds are formed by the electrostatic attraction between a cation and an anion. The electric field of an ion has spherical symmetry, hence ionic bonds have no directional character. Contrastingly, covalent bonds are formed by the overlap of atomic orbitals. Since the overlap is such that the atomic orbitals can attain maximum overlap, a covalent bond has a directional character. Therefore, â€Å"the shape of a molecule is determined by the angle between two bonds, which in turn is determined by the atomic orbitals that form the bond† (Iwanami 2006, p.1). Thesis Statement: The purpose of this paper is to investigate why the shape of a molecule is significant in the study of chemistry. ... The attraction between two adjacent non-polar molecules increases in proportion to the area of contact. Generally, the closeness of the tie between the two increases with greater area of van der Waal’s contact attraction and also with the degree of hydrogen bonding. The higher the level of molecular fit, the stronger is the affinity between a molecule and the biomolecular target in therapeutic agents. A therapeutic agent or medicine in aqueous solution is stablized by hydrogen bonding to water and dipolar solvation. It is evident that in medicines, there is a trade-off; they must be sufficiently well solvated to be soluble in water, â€Å"but not so strongly solvated that they cannot be pulled from solution by the target biomolecule† (Corey et al 2012, p.55). Noncyclic organic molecules are usually flexible because the barrier to rotation about single bonds having low energy. Therefore, most medicines’ structures have cyclic subunits with a few preferred conforma tions, sometimes just one. Fig.1a. and 1b. show the conformation of prednisone, a significant anti-inflammatory and immunosuppressive drug, along with the preferred conformation of glucose. Fig.1a. Chemical Structure of Glucose Molecule (Corey et al 2012, p.56) Fig.1b. Prednisone Chemical Structure (Corey et al 2012, p.56) While the molecular formula for glucose is C5H12O6, the formula for prednisone is C21H26O5. â€Å"The polycyclic framework of prednisone is quite rigid and gives the molecule a characteristic shape† (Corey et al 2012, p.56). Concurrently, several polar functional groups are situated at specific sites in space, facilitating their optimal binding to the target molecule. The Different Shapes of Molecules Based on Structure There are compounds with a divalent central

Personal ethics development Essay Example | Topics and Well Written Essays - 750 words

Personal ethics development - Essay Example The process of testing rules comprises of its universality i.e. can the rules be universally applied to everyone or it treats people as ends but not the means. Every individual has some of the sources where he or she draws some of the basic principles in life that forms the basis of what is wrong or right behavior. In several instances, the following are some of the major sources of ethics. Childhood upbringing- every person learns ethics from his or her parents through either words or most importantly through their actions. I learned some of the ethics by observing and listening and observing what my parents as I grew up. Life experience- at a later stage in life, some of the events directly and consciously shapes the ethics of an individual. For instance, an individual who was treated unfairly during a road accident may most likely have negative attitude in life towards people who treated him or her unfairly. Religious beliefs- nearly most of the religions in the world teach similar code of ethics that emphasizes on respect for other people’s rights, honest and selflessness. Therefore, whether in business or in business situations, religious people act in a manner that is seen as being ethical A person’s ethics can be displayed in the place of work since an individual and the organization can both affect each other’s actions and behavior. Team leaders have a great impact on their team’s behavior and ethics. A place of work is a good place to learn ethics since employees affect each other’s psychology and moral behavior. Therefore employees act as each other’s source of inspiration Good ethics assist an individual in understanding his or her working environment. It also assists an individual to wheedle with team members both in junior and senior positions in a friendly way. This assists in creating conducive working environment thus increasing the performance level. A

Why does it matter what shape a molecule has Essay

Why does it matter what shape a molecule has - Essay Example These are the contexts in which the manner in which materials behave are described, whether they are simple gases, or complex biological structures. The bonds between atoms have distinct lengths, energy and direction which distinguish the atomic structure of materials. The shape of a molecule is formed by the spatial relationships of chemically bonded atoms, and this feature contributes significantly to understanding how molecules react with each other. Ionic bonds are formed by the electrostatic attraction between a cation and an anion. The electric field of an ion has spherical symmetry, hence ionic bonds have no directional character. Contrastingly, covalent bonds are formed by the overlap of atomic orbitals. Since the overlap is such that the atomic orbitals can attain maximum overlap, a covalent bond has a directional character. Therefore, â€Å"the shape of a molecule is determined by the angle between two bonds, which in turn is determined by the atomic orbitals that form the bond† (Iwanami 2006, p.1). Thesis Statement: The purpose of this paper is to investigate why the shape of a molecule is significant in the study of chemistry. ... The attraction between two adjacent non-polar molecules increases in proportion to the area of contact. Generally, the closeness of the tie between the two increases with greater area of van der Waal’s contact attraction and also with the degree of hydrogen bonding. The higher the level of molecular fit, the stronger is the affinity between a molecule and the biomolecular target in therapeutic agents. A therapeutic agent or medicine in aqueous solution is stablized by hydrogen bonding to water and dipolar solvation. It is evident that in medicines, there is a trade-off; they must be sufficiently well solvated to be soluble in water, â€Å"but not so strongly solvated that they cannot be pulled from solution by the target biomolecule† (Corey et al 2012, p.55). Noncyclic organic molecules are usually flexible because the barrier to rotation about single bonds having low energy. Therefore, most medicines’ structures have cyclic subunits with a few preferred conforma tions, sometimes just one. Fig.1a. and 1b. show the conformation of prednisone, a significant anti-inflammatory and immunosuppressive drug, along with the preferred conformation of glucose. Fig.1a. Chemical Structure of Glucose Molecule (Corey et al 2012, p.56) Fig.1b. Prednisone Chemical Structure (Corey et al 2012, p.56) While the molecular formula for glucose is C5H12O6, the formula for prednisone is C21H26O5. â€Å"The polycyclic framework of prednisone is quite rigid and gives the molecule a characteristic shape† (Corey et al 2012, p.56). Concurrently, several polar functional groups are situated at specific sites in space, facilitating their optimal binding to the target molecule. The Different Shapes of Molecules Based on Structure There are compounds with a divalent central

The Sin Tax bill Reaction Essay Example for Free

The Sin Tax bill Reaction Essay The Sin Tax bill (House Bill 5727 and Senate Bill 3249) is a bill which aims to restructure the existing taxes imposed on alcohol and tobacco goods. On December 20, 2012, President Benigno Aquino III signed the Republic Act 10351 or the sin tax reform 2012. The Sin Tax Bill is a sensationalized issue in the Philippines and it gets several mixed reactions from different stakeholders in the country or Filipinos at large. Filipinos are expected to reduce their vices like alcoholism and smoking as a target result of this Bill. Aquino said the new law aims to favor both the government and the Filipino people since revenues to be generated from the measure will be used to fund health insurance programs for the poor, and build and renovate hospitals in the country. Most families of Filipinos especially those who are not residing in urban areas are farmers. The source of their livelihood is farming tobacco products and harvesting fermented liquors, in our dialect â€Å"tuba†. They are now the immediate concern that the government should consider upon the approval of this Bill. Higher taxes on tobacco products mean lesser income for these farmers. Especially, that they are not the owner of the lands they’re farming, they also pay lease for the lands. Unemployment is one of the possible outcomes of the Sin Tax Bill, especially on our farmers. If they become jobless, they likely can resort to different illegal activities just to provide for their family. The aim of the Sin tax Bill is to discourage smokers and alcoholics. But the problem here is that, especially on Filipinos who claim that these vices are addiction to them, they would still continue smoking and drinking alcoholic beverages, to the point that they would sacrifice some of the immediate needs of their families just to sustain their wants. Filipinos are very steadfast on every endeavor they undertake. But they have this mindset that the Programs of the Government are not reaching the true and deserving beneficiaries, like farmers. They may not benefit from these health programs because in the first place they are not living in the cities where standard and quality health responses are located. Maybe these projects may be beneficial to the Filipinos but what of the immediate impact on these increases of taxes? Different Tobacco and Alcoholic Beverages companies might also decrease the salaries of their workers or lay-off employees because its production will become more expensive. It will really affect factory workers and even small-scale business owners. On the other hand, I think this Sin Tax Bill has its positive goals especially to the youth of the nations. Most consumers of these â€Å"sin goods† are youth. With the presence of this bill, there will be higher prices on different cigarettes and alcoholic drinks and since they cannot afford it, they will be discouraged to smoke and drink alcohols. Let’s just cross our fingers that the youth will not resort to illegal means just to continue their vices, especially the out-of-school-children-and-youths. Since they do not have a proper education, we should take it into account that OSCYs are more vulnerable to these vices and if they are not guided properly, this Sin Tax Bill will make sins bigger.

A Hydraulic Accumulator Energy Engineering Essay

A Hydraulic Accumulator Energy Engineering Essay A hydraulic accumulator is a device in which potential energy is stored in the form of a compressed gas or spring, or by a raised weight to be used to exert a force against a relatively incompressible fluid. They are used in fluid power systems to accumulate energy and to smooth out pulsations. Accumulators store energy when hydraulic system pressure is greater than the accumulator pressure and provide hydraulic energy when the accumulator pressure is greater than the system pressure. By storing and providing hydraulic energy, accumulators can be used as a primary power source. Accumulators are inherently dynamic devices, they function when configuration changes (actuators moving, valves opening, etc.) are occurring within a hydraulic system. Accumulators respond very fast to configuration changes, nearly instantaneously for gas accumulators. They are usually used in conjunction with a pump/motor in a hydraulic circuit. A hydraulic system utilizing an accumulator can use a smaller fl uid pump since the accumulator stores energy from the pump during low demand periods. The pump doesnt need to be so large to cope with extremes of demand, so that the supply circuit can respond more quickly to any temporary demand and to smooth pulsations. The capability and affect of the accumulator is determined by the overall volume of the accumulator and preload/pre-charge of the spring/gas. There are 4 types of accumulators: bladder, diaphragm bladder, piston (either spring or gas controlled) and metal bellows. The choice of accumulator to use in a given application depends on required speed of accumulator response, weight, reliability and cost. Pressurized gas accumulators will have the faster dynamic response and are reliable. Metal bellows accumulators are very reliable, but will not respond as fast as a pressurized gas accumulator. Accumulators with seals generally have the lowest reliability. Accumulators are either spherical or cylindrical in design. Bag, piston and metal bellows accumulators are cylindrical. Diaphragm accumulators may be spherical or cylindrical. Accumulators are usually manufactured into 2 halves which are either welded or threaded together. A fill port is installed at one end of a gas accumulator and the hydraulic connection fitting (with poppet valve, if required) is installed at the opposite end. For a spring accumulator, the non pressure sid e usually has a fitting that connects to the hydraulic reservoir (for seal leakage and to alleviate back pressure on a piston). Materials are usually steel, but accumulators may also be made from aluminium or a composite (filament wound) material. Compressed gas accumulators are by far the most common type; these gas accumulators take advantage of the fact that the gas is compressible. A gas accumulator has a gas pre-charge that is less than the nominal hydraulic system pressure. As hydraulic fluid enters the accumulator the gas is compressed to the nominal system pressure, which is an equilibrium position and represents the maximum amount of energy stored by the accumulator. As system hydraulic pressure drops, the gas will expand pushing hydraulic fluid back into the system. The gas pre-charge level is an important parameter for gas accumulators since the pre-charge and overall accumulator volume; determine the maximum amount of hydraulic energy that will be available to the system. The pre-charge is the pressure of the gas in the accumulator without hydraulic fluid in the fluid side. A gas accumulator is pre-charged with nitrogen gas when there is no hydraulic fluid in the accumulator to the desired pressure. The gas accumulator pre-charge is a very important variable for ensuring optimal accumulator performance and maintaining long life of the accumulator. Too high of a pre-charge pressure and the fluid volume capacity is reduced. Furthermore, if a bag accumulator charge is too high than the bag may hit the poppet valve which could damage the bag through repeated hits in service, or cause a fatigue failure in the poppet valve assembly. For a piston accumulator, the piston may be driven into the stops repeatedly affecting seals or cause a fatigue failure in the piston stop. Too low of a pre-charge pressure and the accumulator may not maintain desired minimum hydraulic system pressure. Also a low pre-charge pressure will allow a piston accumulator to repeatedly hit the up stops leading to premature failure of the accumulator. For a bag accumulator, the bag may be forced into an unnatural shape (e.g.,with folds) leading to bag damage and premature bag failure. When sizing an accumulator the pre-charge pressure is an input to the sizing process. However, once the accumulator is sized the minimum and maximum gas volumes should be computed (under worst case conditions) and analyzed to ensure piston stops are not hit or that a bag cannot fully collapse or expand completely in the accumulator. Bladder Accumulator A bladder accumulator consists of pressure vessel with an internal elastomeric bladder with pressurized nitrogen on one side and hydraulic fluid on the other side (system side). Figure 1 shows a bladder accumulator. It has 3 stages of operation: The accumulator is charged with nitrogen through a valve installed in the top. The accumulator will be pre-charged to nominal pressure when the pumps are not operating. Secondly when nominal hydraulic system pressure is applied the bag will be compressed to its fully compressed state. When the bag is fully compressed, the nitrogen pressure and the hydraulic pressure are equal. Finally as system pressure drops the bag expands, forcing fluid from the accumulator into the system. As the bag expands pressure in the bag decreases. The bag will continue to expand until the bag pressure equals the hydraulic pressure (which will be lower than nominal system pressure) or the bag fills the entire accumulator volume which is an undesirable situation. A poppet valve keeps the bag in accumulator from being pulled into the downstream tubing should the bag over-expand. If the bag was pulled into the downstream tubing, the accumulator would never recharge and normal flow from the pump would be constricted. The maximum flow rate of the accumulator is controlled by the opening area (orifice) and the pressure difference across the opening. Figure http://www.globalspec.com/NpaPics/18/146314_030520074661_ExhibitPic.JPGAccumulator, Bladder Typehttp://www.globalspec.com/NpaPics/18/146314_030520074661_ExhibitPic.JPG The main advantages of a bladder accumulator are fast acting, no hysteresis, not susceptible to contamination and consistent behaviour under similar conditions. Accumulators are easy to charge with the right equipment. Because there is no piston mass, the speed of the bladder accumulator is governed by the gas, which reacts very fast to changes in hydraulic system pressure. Hence bladder accumulators are the best choice for pressure pulsation damping. Also, the bladder attachment internal to the accumulator has proven to be very reliable in service. Of course there is always the potential for bladder failure, which is a failure that would not usually be detectable in service. Also, temperature differences on the gas will have some affect on performance. The main limitation of bladder accumulators is the compression ratio (maximum system pressure to pre-charge pressure) which is limited to approximately 4 to 1. Hence gas accumulators will be larger than other accumulators for the same flow requirements. The pre-charge pressure is typically set to approximately 80% of the minimum desired hydraulic system pressure. Diaphragm Accumulator A diaphragm accumulator is similar to bag accumulator except an elastomeric diaphragm is used in lieu of a bag. This would typically reduce the usable volume of the accumulator so the diaphragm accumulator may not have volume capacity of a bladder accumulator. A schematic of a diaphragm accumulator is shown in Figure 2. http://www.machinerylubrication.com/articles/200907/pg26b.gif Figure http://www.machinerylubrication.com/articles/200907/pg26b.gif The behaviour characteristics of a diaphragm accumulator are similar to a bag accumulator and have the same advantages and disadvantages. However a diaphragm accumulator may be spherical or cylindrical (or possibly other shapes) which may be an advantage in some installations. The main difference with bladder accumulators is an increased maximum compressions ratio (maximum system pressure to pre-charge pressure) of approximately 8 to 1. Piston Accumulator A gas piston accumulator is shown in Figure 3. A gas piston accumulator has a piston which slides against the accumulator housing on seals. On one side of the piston is nitrogen and on the other side is the hydraulic fluid and connection to the system. A fill port allows pressurization of the nitrogen. Accumulator, Piston Type Figure http://www.tobul.com/index.php?option=com_contenttask=viewid=13Itemid=27 A gas piston accumulator will not respond to transient pressures as fast as a bladder accumulator due to the mass of the piston (frequency characteristics depend on piston mass and spring characteristics of the nitrogen). However, a piston accumulator will have better damping due to hydraulic leakage (viscous damping) and friction between the piston and housing (coulomb friction seal friction). Piston accumulators may also be more prone to leakage than other types of accumulators due to the seals. Piston accumulators will generally provide higher flow rates than gas accumulators for equal accumulator volumes. This is because piston accumulators can accommodate higher pressure ratios (maximum system pressure to pre-charge pressure) than gas accumulators, up to 10 to 1, compared with bladder accumulator ratios of 4 to 1. The disadvantages of piston accumulators are that they are more susceptible to fluid contamination, have a lower response time than bladder (unless the piston accumulator is at a very high pressure) and will have hysteresis from the seal friction. The pre-charge for a gas piston accumulator is typically set to around 90% of minimum desired hydraulic system pressure. A schematic of a spring piston accumulator is shown in Figure Accumulator, Spring Type In a spring accumulator, the spring applies a force to a piston which compresses (or pressurizes) the fluid in the accumulator. As normal system pressure, the spring will be fully compressed. As system flow demands exceed the pump capacity, the spring will extend pushing the piston which in turn pushes fluid into the adjoining pipe. Hence the accumulator supplements pump flow. The maximum response time of the accumulator is set by the natural frequency, which is computed using Metal bellows accumulators are used where a fast response time is not critical yet reliability is important. Emergency brake accumulators are a good application for metal bellows accumulators. The metal bellows accumulator consists of a pressure vessel with a metal bellows assembly separating fluid and nitrogen. The accumulator is similar to a piston accumulator, except a metal bellows replaces piston and piston seals. Metal bellows accumulators are very reliable and long life components, and have a proven service history. Metal bellows accumulators are pre-charged by supplier and then permanently sealed leading to a maintenance free accumulator. Metal bellows accumulators will be slow in responding to pressure changes due to increased mass of piston and bellows. The advantages to the metal bellows type include exceptionally low spring rate, allowing the gas charge to do all the work with little change in pressure from full to empty, and a long stroke relative to solid (empty) height, which gives maximum storage volume for a given container size. The welded metal bellows accumulator provides an exceptionally high level of accumulator performance, and can be produced with a broad spectrum of alloys resulting in a broad range of fluid compatibility. Another advantage to this type is that it does not face issues with high pressure operation, thus allowing more energy storage capacity. Applications of Accumulators to KERS One of the main applications of hydraulic accumulators is storing energy. Hydro-pneumatic accumulators incorporate a gas in conjunction with a hydraulic fluid. The fluid has little dynamic power storage qualities. The fluid can only be reduced a small amount in volume even under high pressure. Therefore when only a small amount of the total contained volume is released, the pressure of the remaining fluid in the system will drop to zero. However, the relative incompressibility of a hydraulic fluid makes it ideal for fluid power systems and provides quick response to power demand. The gas, however working with the hydraulic fluid in the accumulator, can be compressed to high pressures and low volumes. Potential energy is stored in this compressed gas to be released upon demand. In the piston type accumulator the energy in the compressed gas exerts pressure against the piston separating the gas and hydraulic fluid. The piston in turn forces the fluid from the cylinder into the system a nd to the location where useful work will be accomplished. On this basis, with respect to all the types of accumulator a hydro-pneumatic accumulator would be ideal for storing the energy taken out of a bike whilst braking.. Of course the loss of pressurized gas in a sealed accumulator is a failure critical to safety when it plays such an important role as braking. A team of engineering students from university of Michigan undertook a project to use a hydro-pneumatic regenerative braking on a bicycle. It was a redevelopment of a heavier previous attempt to make a working prototype to fit within a 29 front wheel. They use a 0.5L accumulator and believed this to be sufficient in storing the required energy at a maximum working system pressure of 5000psi. They failed to test and thus supply conclusive results for the performance characteristics but through theoretical analysis they prescribe the key parameters fig. Figure Its weight is clearly impractical as it weighs almost as much as a conventional bike at 13kg. In terms of weight of a bicycle with respect to saving weight, it is more important to have lighter wheels than a lighter bike frame. This is because the rolling resistance is applied at the wheels although it carries half the overall weight of bike and rider a lighter wheel makes it easier to initially start a bike. Based on the team from michigans ( ) the following calculations outline the practicality of implementing a hydraulic KERS. Firstly for a hydraulic system to be implemented the storage must be addressed the capacity must be determined and pressures needed to store the kinetic energy. A bike braking from 20mph requires 5000J of energy to power. From Parkers website a manufacture of accumulator and motors parkers rate the ACP series accumulators at max pressure 5000psi, if assuming A hydraulic KERS must use a hydraulic motor to provide enough torque to drive the bike as well as provide enough resistive torque to be an effective brake. A bicycle travelling at 20mph on 26 wheels spins the motor through 18:1 gear ratio of the pump gear train which then spins the motor 4632rpm, corresponding to 4.52 N-m torques at 3000 psi. This translates to a braking torque of about 81.36 N-m applied to the main gear due to the 18:1 gear ratio. From this brake torque is an effective brake On release of pressure fully charged 5000 psi accumulator generates 7.57 N-m of torques. The 14:1 gear ratio of the motor gear train applies a 105 N-m torque to the main bicycle cluster gear. 7.57 N-m corresponds to around 800 rpm from its torque rpm curve, which turns the main gear at around 57 rpm due to the 14:1 gear ratio. This torque from fig can propel a bike at Conclusion The accumulator doesnt need to be an excessively large capacity to release enough energy to propel a bike 20mph, upon releasing the energy at a pre-charge of 3200psi. But a larger accumulator is needed for the accumulator to give more than one bursts using its full capacity. A hydraulic motor can produce 81.36N-m braking torque which is an effective brake. Furthermore an accumulator can power a hydraulic motor provide an accelerating torque to propel a bicycle. However based on the weight of the design from univerty of Michigan their prototype was 13kg, they used two accumulators plus they attached it to a bracket that probably contributed to the majority of the weight.

History of Fireworks :: Chine Fireworks Explosives Essays

History of Fireworks The birthplace of fireworks is generally recognized as China, with the first explosive mixture found being black powder, during the Sung dynasty ( 960-1279 ). It is said that a cook in ancient china found that a mixture of sulfur, saltpeter, and charcoal was very flammable and would explode if enclosed in a small space. The first application of this technology was for entertainment. The Chinese are still the leader in the production of fireworks. Once the recipe for black powder was perfected, they found that it was easily used as rocket fuel, and they made hand carved wooden rockets in the shape of a dragon, in the sixth century. These rockets shot rocket powered arrows from their mouth, and were used against the Mongol invaders of 1279. The principle behind these rockets is still used in rocket powered fireworks today. Through adventurous explorers, the knowledge of making fireworks spread west, through Arabia in the seventh century. The Arabs called the rockets Chinese arrows. The Mongols are credited with taking Chinese rockets and gunpowder to Europe around 1241. The first record of their use in Europe are around 1258. Until the 19th century, fireworks lacked a major aesthetically essential characteristic: color. Pyrotechnicians began to use a combination of potassium chlorate and various metallic salts to make brilliant colors. The salts of these metals produce the different colors: strontium burns red; copper makes blue; barium glows green; and sodium, yellow. Magnesium, aluminum, and titanium were found to give off white sparkles or a flash. Even though China invented the fireworks, Europe surpassed them in pyrotechnic development in the 14th century, which coincides with the time the gun was invented. Shot and gunpowder for military use was made by skilled tradesmen, later called firemakers, who also made fireworks for peace or victory celebrations. During the Renaissance, two European schools of pyrotechnic thought emerged: one in Italy and the other at Nuremberg, Germany. The Italian school of pyrotechnics emphasized elaborate fireworks, and the German school stressed scientific advancement. Both schools added significantly to further development of pyrotechnics, and by the mid-17th century fireworks were used for entertainment on an unprecedented scale in Europe, being popular even at resorts and public gardens. In the mid-19th century fireworks became popular in the United States. Injuries associated with fireworks, particularly to children, eventually discouraged their unrestricted use. As a result, in many states of the U.

Immigrants Escaping from Poverty :: Immigration Illegal Essays Papers

For a long time, illegal immigrants have been entering the United States, and it has been a big issue concerning the world today. Hispanics today form the fastest growing ethnic minority in the United States. An example of how many illegal immigrants migrate to the U.S. is found in the book Voyages by Cathy Small; she explains that many Tongan immigrants migrated in the year 1976. Out of 1,993 Tongan’s, Olunga had grown approximately 2%, so by all means that at least 40% of its population had migrated between the years 1956 and 1976. By 1970 the inhabitants’ population growth was already dropping. This means that there were 200 people less than the past years. Many immigrants want to migrate to the United States to gain a better life for their families, for economic opportunity, and to escape political persecution. Many immigrants are working illegally and the government is not aware of how many of them are actually getting away with it, and others of course are being detained and isolated from their work force. Now so many illegal immigrants are being evicted easily from their work force or even from off the streets. In the book Disposable Domestics, Grace Chang explains that there had been sixty law enforcement agents from Virginia’s sheriff’s office who joined the federal agents. They were joined together by the Immigration and Naturalization Service to rummage around a construction site where workers were building a court jail. Later, agents had gathered one hundred employees together in an array against the wall, searching for undocumented employees. Soon after the whole fiasco, a deputy secretary of Virginia Healt h and Human Resources department was informed that fourteen people were detained and removed from their work force for not having documents. Grace Chang also discusses a case of a nominee for United States Attorney general. Zoà « Baird admitted that she employed two undocumented Peruvian immigrants. We also learn that employers hire illegal immigrants for the benefit of saving money. If employers wanted legal workers they would be able to get them, but it would cost them more. Putting some thought in this subject, illegal immigrants have some of the hardest jobs, that require so much labor, and don’t get paid as well, while a legal person would think it is not worth getting exhausted over.

What I Believe In †Beliefs that Frame My Outlook on the World

We humans are entitled to have our own beliefs. These beliefs serve as our guiding principles in living our lives. They also help in building and framing our outlook towards the world we live in and towards our relationships with other people. Our beliefs can determine our character and can give reasons as to how we should live our lives every single day. What I personally believe in is actually very simple and basic. I believe in the power of doing something good to other people. For some reason, I grew up believing that if I do an act of goodness, life would be good to me as well.It is not as if I am asking or expecting for something in return every time I do something good. It is not that way. I just believe that showing an act of kindness and concern to others adds meaning into my life and it helps me feel good as well. This belief had helped me gain a better outlook in life. It feels good to receive a sincere smile from other people and even strangers whom I try to help – whether it is just a tiny gesture of offering a seat in the bus or picking up something that they have dropped.For me, an act of goodness – whether great or small – makes life more fulfilling. It warms the heart and makes the world seem happier and safer. I believe that a person can never be wrong if he chooses to do whatever is good. There are many opportunities for us to show an act of goodness every single day if we just look around – helping an elderly cross the street, donating something to the charity, participating in an environmental project, volunteering at a community centre and offering our companionship to someone who is in need of a friend; and many others.Even without exerting any conscious effort, I know that there are still a lot of ways for me to do something good like being patient while waiting in line at the fast food counter, being nice to the waiters and waitresses in restaurants, saying â€Å"thank you† to that security guard that opens and closes the door for me at the bank and by simply saying â€Å"I’m sorry† and â€Å"Please† all the time. I consider patience and good manners as virtues that I need to practice everyday in order to instil them in my character.Imagine if every person on earth would attempt to do an act of goodness everyday. There would probably be lesser troubles for people. The world can become a better place and we can set good examples to the younger generation. Whether we accept it or not, choosing to do what is good and showing kindness to others can go a long way. By doing so, we are already uplifting, inspiring and helping others in ways we can never quite expect. It is like touching other people’s lives and giving them hope that goodness still exists and there are ways to spread it out to the others.From another perspective, I believe that doing something good everyday of my life will help me have a good life as well. I have this idea in my mind that doin g acts of goodness all the time has its paybacks. As I have mentioned earlier, this is not associated with me asking for something in return. It simply means that I believe that there is such a thing as good karma. It is like leaving the rest to the forces of nature that exist or to fate; or to our Creator. It does not really matter which, what or who is responsible for the payback.All I know is that in life, goodness has its own price. As long as I am a good person, I can expect pleasant things to come my way. Life has its own twists and turns and this is something that is known to all of us. Sometimes, things do not always turn out as expected. I have experienced this to a great extent. While I am at my life’s mission of spreading goodness to others, one of the people whom I helped had betrayed me. This person has hurt me and despite of the good things I have done for him, he chose to pay me back with betrayal and deception.Another instance was when I decided to join a very worthy cause. I ended up being accused of something I did not do. I became a victim of injustice. Despite of all the help and effort I exerted for that particular project, I was accused of being on the negative side. Indeed, both experiences had been extremely disappointing and yes, painful to some extent. I would be a hypocrite if I would say that these specific events in my life did not shake my belief. In fact, there were days when I asked myself if I should continue being good to those who had hurt, betrayed and accused me.Is it still worth it to believe in the power of goodness? Should I continue believing that goodness can conquer all the negative things in this world? I was taken aback at how people can easily use and judge others. However, later on, I came to a realization that every person goes through several challenges and trials in his lifetime. That is the essence of living. My beliefs are my guiding principles on how I would live my life; but I should not expect other people to also believe whatever it is that I believe in; or expect them to follow my principles.Each person is unique and has his own beliefs. There will be times when the act of goodness that I do will not be reciprocated. That is my challenge and it is something that I should learn to accept. I also have to acknowledge the fact that people do not act and think alike all the time. Things will not always go my way or turn out as expected. The outcomes of my beliefs can either be favourable or unfavourable. Still, there is nothing wrong with believing that â€Å"goodness equates to goodness† regardless of everything. Thus I still believe in the power of doing good things to others.In conclusion to this personal insight, I simply want to state that our belief gives meaning to our existence and moulds our character. In my case, I find fulfilment and pleasure in doing something good to others – like showing some concern, expressing love or extending an act of kindness. I know that there will be times when my belief will be tested or challenged and I can easily lose my grip. However, as long as I know that what I believe in is right and just, life will find a way to pay me back. References http://www. npr. org/templates/story/story. php? storyId=4538138&ps=sa

Health Club Essay

Health clubs have sprouted everywhere to offer alternatives to the traditional gym set-up.   Health clubs provide not just exercise equipments but health and fitness programs as well.   In this regard, the manifest functions of a health club include: – providing an exercise venue; – providing a comprehensive health and fitness program; – promoting general well being through exercise and fitness routines. As the name implies, a health club’s most evident function is keeping its members healthy and the club does it through the most natural means of keeping fit; that is, by exercising and following a healthy lifestyle.   Health clubs do not offer artificial means of trimming down and toning the body.   If a fat person wants to lower his weight, he has to train his body instead of drinking diet pills.   Aside from the exercise equipment, a health club has sports facilities and exercise classes to help its members achieve a balanced and monitored fitness program. Meanwhile, a health club also has latent functions that are not readily evident to people.   These include: – providing a venue for a family to spend bonding time; – a potential ground for networking; – promoting good health and healthy living not just among its members but the country as a whole; and – helping the people and the government save on health care costs; A health club is a good place for a family to go.   Becoming fit together is a good way for family to spend time together.   A health club also provides people with new acquaintances that they can possibly have business with in the future.   By promoting healthy living, a health club keeps the people from getting sick.   This means a lot of savings on hospitalization and health care costs.

Is Lady Macbeth the villain of the play? Essay

The fact that Lady Macbeth is called ‘a fiend-like queen’ by Malcolm automatically makes the audience view her as a demon, thus making the audience dislike her even more. Lady Macbeth could be viewed as an evil demon or as a supportive and guilt-eaten wife. However there are many events and circumstances which we should take into consideration before any conclusions are formulated. Lady Macbeth’s deceptive, persuasive and potentially witch-like manner should not be overlooked. Although she is the instigator of many of the tragic events in the play, she also comes across as being a loyal and supportive wife. We first meet with Lady Macbeth in Act 1, Scene 5 where she could be viewed as being very close to Macbeth as it seems that she knows him very well. When she reads his letter she does not mock him or doubt his character once which shows that she could indeed be the loyal wife. Although she sees Macbeth as being kind and brave, she also shows her witch-like qualities when she says that she will pour spirits into his ear to make him have more courage in order to kill Duncan to gain the throne; â€Å"That I may pour my spirits in thine ear.† Lady Macbeth calls upon evil spirits to remove her gentler feelings so that she doesn’t feel any guilt or fear. This would make the audience view Lady Macbeth as a witch or a demon and thus making them take an instant disliking to her. When Macbeth arrives at their castle at Inverness he talks with Lady Macbeth and then it becomes apparent that Lady Macbeth has a plan which will lead to Macbeth becoming King. Lady Macbeth tells Macbeth to act normal when Duncan visits the castle, but to be dangerous and sneaky underneath; â€Å"Your hand, your tongue; look like th’innocent flower, But be the serpent under’t† When Duncan arrives at the castle, Lady Macbeth appears to be a very welcoming and charming hostess and her flattery hides her intentions. In Act1, Scene 7 Lady Macbeth’s true character comes to light and we see that she taunts and accuses Macbeth of cowardice. The way that she treats Macbeth in this scene contradicts the fact that she was a very supportive wife to start with. She taunts his strength and even accuses him of not loving her enough. Macbeth saying that he doesn’t want to kill Duncan makes Lady Macbeth very angry and she says that he has broken a promise and also that she would sooner kill her own baby that break a promise; feelings that very few women have. Lady Macbeth seems to manipulate Macbeth’s feelings very easily and it is obvious that she has a very big influence on Macbeth, and eventually, Macbeth decides to kill Duncan. Even though there are many events which support the fact that Lady Macbeth is the villain of the play, in Act 2, Scene 2, we see that she is not as tough and as strong as she shows; â€Å"That which hath made them drunk, hath made me bold; What hath quenched them, hath given me fire.† This shows that Lady Macbeth had to have a drink to calm down and to make herself brave as she keeps on hearing noises in the night and she is convinced that they are the screams of Duncan, when in fact they are owls. When Macbeth returns from Duncan’s room with two daggers she fears that he has not committed the murder and then she says that she could not have committed the murder as Duncan looked too much like her father! Neither Macbeth nor Lady Macbeth think straight in this scene, but it is Lady Macbeth that decides to return to Duncan’s room with the daggers and put them next to the guards to ensure that their plan goes as they intended. This could be her way of helping put the murder to a complete close and to ensure that they do not feel guilty. Lady Macbeth then plans an alibi and tells Macbeth that she does not feel guilty. The enormity of his crime grows along with the confidence of Lady Macbeth which could be a sign of worse events to come. When news of Duncan’s murder goes around the castle, Lady Macbeth again acts well in the defence of herself and Macbeth by covering up her guilt and knowledge of what’s happened by fainting in order to draw attention away from Macbeth as not to give too much away. The fact that Lady Macbeth is a consummate actress creates a feeling of insecurity in my mind as whether to trust her or to doubt everything she does, which I am sure is a feeling felt by any reader or audience of the play. The fact that Lady Macbeth is the villain of the play so far is somewhat changed when we reach Act 3, Scene 1 when we see that Macbeth plans to murder Banquo. This murder goes underway without Lady Macbeth finding out which could then support that Lady Macbeth is not the villain of the play and the only reason that she planned the murder of Duncan as a way to fulfil her husband’s one and only ambition to become King. Macbeth shows that he is for once in complete control and that he is killing Banquo from his own choice, and is not being urged to do so by anybody else. Lady Macbeth appears to be a very supportive and loyal wife in Act 3, Scene 2 where we see that Lady Macbeth helps Macbeth to overcome his feelings of guilt and insecurity. At the banquet, Lady Macbeth again proves to be a very good actress as she welcomes the guests with a friendly smile and she then covers up Macbeth’s strange behaviour with a convincing story. When Macbeth starts to see the ghost of Banquo sitting next to him, Lady Macbeth reassures him that there is no ghost and then she covers up for him so that the other guests do not view his actions as strange or suspicious; â€Å"Why do you make such faces? When all’s done You look but on a stool.† The way that Lady Macbeth acts on several occasions shows that she is capable of hiding her real feelings which could have lead to the events later on in the play. The next time that we meet with Lady Macbeth is in Act 5, Scene 1 where we see that she is very ill and sleep walking. Lady Macbeth shows great feelings of remorse which shows that maybe she is not the villain of the play. Whilst asleep, Lady Macbeth re-enacts the night of Duncan’s murder through washing her hands in the air and talking; â€Å"Out damned spot! Out, I say!† Her words echo events of the past and this shows that she is permanently thinking of the murders that have taken place. Her caring and supportive manner comes through in the way that she speaks in her sleep and this would again support that she is not the villain of the play. At the end of this scene her true guilt and the fatality of her illness is expressed when the doctor tells Lady Macbeth’s gentle woman to take away any objects which she could harm herself with as he fears that she may commit suicide, this fore-warning does indeed occur later on. In Act 5, Scene 5, Lady Macbeth does actually commit suicide, this is true evidence that Lady Macbeth could not live with the guilt of what has happened and her unhappiness; â€Å"The queen my lord is dead.† The news of Lady Macbeth’s death brings great sorrow upon Macbeth and this makes him realise the futility of his life. This would say that he loved Lady Macbeth and that maybe she wasn’t the pushy and cruel wife that she appeared to be. I conclude that Lady Macbeth was not the villain of the play because she was driven to suicide by the actions of her husband’s actions which she realised were wrong as soon as they were carried out. She did not take part in any of the murders she was merely the instigator of one. The fact that she could not bare to live any longer due to being over come with remorse makes me think that she obviously felt sorry for what happened and that she could not be a villain if she realised the serious nature of what happened as many people do wrong but do not realise that it was wrong. I think that the reason that she planned the murder of Duncan was to fulfil her husband’s ambition and to become queen, a title which she did not feel greatly any way.